Hi, trying to recover cp960 after downgrade failed, recovery mode using CP960 bin rom rms give me "Update failed(-1)"
↧
CP960 upgrade to teams n downgrade to yealink original failed
↧
Local Contacts Restore Problem
Hi Group
Im using Local Backup as follows:
I am testing on T54W,T4xS on v84 and T46G on v83.
The T46G backs up and restores fine using a resync however the v84 phones require a reboot before the contacts are restored. Is this by design?
Im actually building an application that allows you to change the stored Local Contact file and resync restores the file to the phone. Working fine on the T46G but not the v84 phones![Sad]( "Sad")
I checked the Pcap file sent to the phone and it is correct but the phone is not accepting it.
Any ideas?
Mike
Im using Local Backup as follows:
Code:
static.auto_provision.local_contact.backup.enable=1
static.auto_provision.local_contact.backup.path=<path>
static.auto_provision.custom.upload_method=1I am testing on T54W,T4xS on v84 and T46G on v83.
The T46G backs up and restores fine using a resync however the v84 phones require a reboot before the contacts are restored. Is this by design?
Im actually building an application that allows you to change the stored Local Contact file and resync restores the file to the phone. Working fine on the T46G but not the v84 phones
I checked the Pcap file sent to the phone and it is correct but the phone is not accepting it.
Any ideas?
Mike
↧
↧
T48S
We have users that setup 30+ speed dials.
Is there a way to save/record/backup these speed dials so that in the event of a router reboot or failure, they can be easily restored?
Is there a way to save/record/backup these speed dials so that in the event of a router reboot or failure, they can be easily restored?
↧
No way to exit Settings app on T58A
With latest firmware update to my T58A (58.85.0.5) I find that there is no way to exit the Settings app. It seems crazy, I realize. The same applies to the File Manager app. However, the apps which interact directly with phone data such as calls, contacts, and messages retain their little left arrow icon in the top left-hand corner, enabling exit back to the main phone screen.
This problem is persistent over several firmware version downgrades and upgrades. It's like the Android section of the phone is busted.
Anyone else seen such a syndrome? Any ideas?
Thanks in advance for any help.
This problem is persistent over several firmware version downgrades and upgrades. It's like the Android section of the phone is busted.
Anyone else seen such a syndrome? Any ideas?
Thanks in advance for any help.
↧
Provisioning of W60B Speeddial
Is it possible to use provisioning to set speeddial in DECT Handsets W53H and W56H and use LDAP Entries?
↧
↧
Yealink T41s Multiple sip Accounts
I have a t41s capable of six sip accounts. I have a sip account thru twilio. I programed the same account into to different extensions. We receive inbound calls but only one extension rings. How can I fix. I figured while on another call the other extension would ring but it doesnt they are both registered when I look at my yealink site
![.jpg]()
IMG_0249.jpg (Size: 1.24 MB / Downloads: 1)
IMG_0249.jpg (Size: 1.24 MB / Downloads: 1)
↧
Best Laptop Repair In Muzaffarpur - Just Visit Online
Mobile and Laptops have always been on top of the list of gadgets. Because these, especially Laptops, are something that needed most, be it homes, offices, and travelings, they are more likely to get service at time. Laptops make your task easier and more comfortable. To reap as much as possible benefits from the laptop, they require proper repair or services at the time required. So it is important to get it fixed before your laptop gets out of your hand. It is a bit important to consider the performance of your laptop before it hampers your work. They are too delicate and carry a lot of confidential data. You can't put your laptop at risk by handing it over in the local market. This is where SathiClap comes into existence. SathiClap technicians can solve even the toughest issue of your laptop at just affordable prices. If you want to get your Laptop Repair in Muzaffarpur, SathiClap can be named at the top in the list.
https://sathiclap.com/category/laptop-co...uzaffarpur
https://sathiclap.com/category/laptop-co...uzaffarpur
↧
UH33 not working on T46S and T54S
We just bought a UH33 Headset for testing purpose and it's not detected properly on a T46S and T54S phone. Both phone are on v84+ firmware.
Is there an option to change in the configuration of the phone ?
When we plug the headset, the USB icon flashes for a while then we get a USB failed message.
Is there an option to change in the configuration of the phone ?
When we plug the headset, the USB icon flashes for a while then we get a USB failed message.
↧
Label length doesnt work
I have a T48G with firmware 35.83.0.120 and I have attempted to adjust the label length of the DSS keys however nothing happens no matter what option I select.
Any assistance would be greatly appreciated
Any assistance would be greatly appreciated
↧
↧
Import phone directory w/pics
Dear Group:
I just purchased a T58A phone to add to my existing network of Yealink phones, mostly T48G phones.
I was hoping that my phone directory from my T48G could be imported to the new T58A, but it didn’t go as expected.
The phone numbers came through okay, but...the pictures didn’t.
Is there anyway to import the pictures along with the phone numbers from the T48G phone?
I just purchased a T58A phone to add to my existing network of Yealink phones, mostly T48G phones.
I was hoping that my phone directory from my T48G could be imported to the new T58A, but it didn’t go as expected.
The phone numbers came through okay, but...the pictures didn’t.
Is there anyway to import the pictures along with the phone numbers from the T48G phone?
↧
Template vs Configuration
Forgive the naivete, I'm new to Yealink. It's unclear to me what the difference is between a phone template and configuration file. They seem similar to me, except one is xml and the other text (or bin).
As I provision new phones, I'm not able to determine where the configuration comes from, or if even need to concern myself, since the phone template is on the 3CX server.
We have T2 and T4 series phones.
Any assistance is appreciated.
As I provision new phones, I'm not able to determine where the configuration comes from, or if even need to concern myself, since the phone template is on the 3CX server.
We have T2 and T4 series phones.
Any assistance is appreciated.
↧
OpenVPN Version List
Is there a list of which openvpn versions are installed on the corresponding firmware somewhere?
It would be helpful to know so I can make sure the server is compatible.
Thanks!
It would be helpful to know so I can make sure the server is compatible.
Thanks!
↧
DECT headset?
Is it possible to use a DECT headset with the W60B? I have an old Plantronics C565 and would be handy if I could use this with the W60B/W56H combo I have just purchased.
↧
↧
Multiple Extensions ringing
Hi,
Can someone please explain to me how to get two extensions to ring at the same time when someone rings either of them? We are using the SIP T21P E2 phones.
Thanks
Can someone please explain to me how to get two extensions to ring at the same time when someone rings either of them? We are using the SIP T21P E2 phones.
Thanks
↧
VC200 Zoom Basic Setup or Alternate Setup
Hi All,
We have recently delivered and setup a VC200 at a client site. Upon setup we found that Zoom Pro with Room Add-on is required to get this working with Zoom.
There is next to no documentation available online, the user guide doesn't really elaborate past anything Yealink related.
Our client has turned around and stated they cant justify the yearly Zoom spend on top of the cost of the hardware. I must admit, if we had known about this per-requisite we wouldn't have recommended this hardware. Documentation stated the VC200 runs Android so would have though we could simply install Zoom or even Skype APK's.
Is there anything we can do to get the VC200 going without spending extra on Zoom? Our client already runs Office 365 with Teams, can we integrate Teams, Zoom Basic or Skype instead? Happy for any suggested alternatives as-well.
Many Thanks,
James
We have recently delivered and setup a VC200 at a client site. Upon setup we found that Zoom Pro with Room Add-on is required to get this working with Zoom.
There is next to no documentation available online, the user guide doesn't really elaborate past anything Yealink related.
Our client has turned around and stated they cant justify the yearly Zoom spend on top of the cost of the hardware. I must admit, if we had known about this per-requisite we wouldn't have recommended this hardware. Documentation stated the VC200 runs Android so would have though we could simply install Zoom or even Skype APK's.
Is there anything we can do to get the VC200 going without spending extra on Zoom? Our client already runs Office 365 with Teams, can we integrate Teams, Zoom Basic or Skype instead? Happy for any suggested alternatives as-well.
Many Thanks,
James
↧
Power of signal W60P
hello
> Indoor Range: 20m~50m (The ideal distance is 50m)
> Outdoor Range: 300m (in ideal conditions)
Hello
Is it possible to increase the range of yealink w56H firmware 61.83.0.50 stations
by desactive eco mode
Thanks
> Indoor Range: 20m~50m (The ideal distance is 50m)
> Outdoor Range: 300m (in ideal conditions)
Hello
Is it possible to increase the range of yealink w56H firmware 61.83.0.50 stations
by desactive eco mode
Thanks
↧
Yet another T58A won't autoprovision Firmware Update
Everything else works just fine. URL is set. I have the settings in the mac.cfg file, the y000000000058.cfg, common.cfg file everywhere imaginable.
Seems to look at the mac.cfg file on my setup. It will pull down the other items from an http server, like on hold music etc. Tried to point the autoprovision to the firmware on FTP/HTTP and TFTP...nothing works.
mac.cfg example:
static.auto_provision.server.url = tftp://192.168.1.56
static.firmware.url = tftp://192.168.1.56/T55A(T58A,T56A)-58.15.0.107.rom
Using Skype and Teams versions testing firmware for migration, and it will never query any servers. I see it hit the servers, http, ftp and tftp for the y000000000058.cfg file every time.
Any help or config info appreciated. Driving me insane. Docs haven't done any good, followed them very closely.
I should also open another thread about DHCP scope options and factory reset auto provision...I do this all day with our Polycom VVX 601s no problems...not Yealink.
But let us focus on just the firmware. The autoprovision works when I press autoprovision in the http interface, for something like, pointing to a different server etc..
It just won't ever take and update the firmware.
Thanks!
Seems to look at the mac.cfg file on my setup. It will pull down the other items from an http server, like on hold music etc. Tried to point the autoprovision to the firmware on FTP/HTTP and TFTP...nothing works.
mac.cfg example:
static.auto_provision.server.url = tftp://192.168.1.56
static.firmware.url = tftp://192.168.1.56/T55A(T58A,T56A)-58.15.0.107.rom
Using Skype and Teams versions testing firmware for migration, and it will never query any servers. I see it hit the servers, http, ftp and tftp for the y000000000058.cfg file every time.
Any help or config info appreciated. Driving me insane. Docs haven't done any good, followed them very closely.
I should also open another thread about DHCP scope options and factory reset auto provision...I do this all day with our Polycom VVX 601s no problems...not Yealink.
But let us focus on just the firmware. The autoprovision works when I press autoprovision in the http interface, for something like, pointing to a different server etc..
It just won't ever take and update the firmware.
Thanks!
↧
↧
W56H Dont deregister
Hi, I have a new base w80 but try to register the handset w56h don't register, show in the register bases, 3 different bases, how to delete this bases for the register a new base?
Thanks and Regards
Thanks and Regards
↧
Vlan to no vlan
Hello all, I have hopefully a simple question. I have a client that would like to use the T46S on their office network using vlan 1xxx. Then if the employees needs to take the phone home to use, be able to plug it in to the employee's home inter net and have the phone work. is this possible?
Can the T46S model "see" a vlan and prioritize it over unsegmented networks? Then when the vlan its looking for is not available choose the regular internet connection?
Thank you for any substitutions on this topic.
Can the T46S model "see" a vlan and prioritize it over unsegmented networks? Then when the vlan its looking for is not available choose the regular internet connection?
Thank you for any substitutions on this topic.
↧
T21P E2 default Programmable Key label in V84
Does anyone encountered issue that the default programmable key changed to "S_XXX" after upgrade to V84 ?
e.g. In V83 , the DND button label is "DND" but in V84, the default label changed to "S_DND" , and the "Menu" change to "S_Menu" , under the menu , "Status" - > "Menu_Status" ...etc
Do I need to manual adjust all the programmable key label and it's menu tree after upgrade to V84 ?
![.jpg]()
T21P v84.jpg (Size: 3.61 KB / Downloads: 1)
![.jpg]()
T21P v84_2.jpg (Size: 3.62 KB / Downloads: 1)
e.g. In V83 , the DND button label is "DND" but in V84, the default label changed to "S_DND" , and the "Menu" change to "S_Menu" , under the menu , "Status" - > "Menu_Status" ...etc
Do I need to manual adjust all the programmable key label and it's menu tree after upgrade to V84 ?
T21P v84.jpg (Size: 3.61 KB / Downloads: 1)
T21P v84_2.jpg (Size: 3.62 KB / Downloads: 1)
↧