Does anyone else have issues with the UI being sluggish? I know for us we have 16 phones and it's fairly not uncommon for this issue to occur.
↧
Poor Performance
↧
T32G Auto provisioning error with encryption
Hi,
Just wanting to see if anyone has found a fix for not being able to encrypt the MAC based configuration file on an older T32G handset.
In the common file are you allowed to use the following:
auto_provision.aes_key_in_file = 1
auto_provision.update_file_mode = 1
Or does the the aes key have to be placed in the common file?
The phone has the latest firmware: 32.70.1.33
Following from the phones log:
Oct 10 00:00:24 autop[386]: http.c(1443): dns timeout:5
Oct 10 00:00:24 autop[386]: error.c(111): dns count:2,RetryTimes=2, Timeout=1
Oct 10 00:00:24 autop[386]: http.c(358): device mac:00:15:65:38:14:3d
Oct 10 00:00:24 autop[386]: http.c(3505): query header: GET /yealink/y000000000032.cfg HTTP/1.1^M Host: XXXXXXXXXXXXXX^M User-Agent: Yealink SIP-T32G 32.70.1.33 00:15:65:XX:XX:XX^M Accept: */*^M Connection: Keep-Alive^M ^M
Oct 10 00:00:24 autop[386]: http.c(3542): ***send data*** ......
Oct 10 00:00:24 autop[386]: http.c(3650): recv header: HTTP/1.1 200 OK
Oct 10 00:00:24 autop[386]: http.c(2299): Content-Type: text/xml
Oct 10 00:00:24 autop[386]: http.c(2299): Last-Modified: Fri, 15 Sep 2017 05:17:12 GMT
Oct 10 00:00:24 autop[386]: http.c(2299): Accept-Ranges: bytes
Oct 10 00:00:24 autop[386]: http.c(2299): ETag: "a6b3fe3e12dd31:0"
Oct 10 00:00:24 autop[386]: http.c(2299): Server: Microsoft-IIS/7.5
Oct 10 00:00:24 autop[386]: http.c(2299): X-Powered-By: ASP.NET
Oct 10 00:00:24 autop[386]: http.c(2299): Date: Fri, 15 Sep 2017 05:18:01 GMT
Oct 10 00:00:24 autop[386]: http.c(2299): Content-Length: 4868
Oct 10 00:00:24 autop[386]: http.c(2299):
Oct 10 00:00:24 autop[386]: [./src/fileStream.cpp :1052] IFO Open URL OK
Oct 10 00:00:29 autop[386]: http.c(1327): http recv timeout:5
Oct 10 00:00:34 autop[386]: http.c(1327): http recv timeout:5
Oct 10 00:00:34 autop[386]: [./src/autoParser.cpp :238 ] IFO Unencrypted file cannot be updated!
Oct 10 00:00:34 autop[386]: [./src/autoParser.cpp :911 ] ERR Decryption file error!
Oct 10 00:00:34 autop[386]: [./src/autoUpgrade.cpp :990 ] IFO strMacName = [XXXXXXXXXXXX.cfg]
Oct 10 00:00:34 autop[386]: [./src/autoParser.cpp :706 ] IFO Open download stream
Oct 10 00:00:34 autop[386]: [./src/fileStream.cpp :937 ] IFO OpenDownloadStream[XXX.XXX][/yealink/XXXXXXXXXXXX.cfg]
Oct 10 00:00:34 autop[386]: http.c(1443): dns timeout:5
Oct 10 00:00:34 autop[386]: error.c(111): dns count:2,RetryTimes=2, Timeout=1
Oct 10 00:00:34 autop[386]: http.c(358): device mac:00:15:65:XX:XX:XX
Oct 10 00:00:34 autop[386]: http.c(3505): query header: GET /yealink/001565XXXXXX.cfg HTTP/1.1^M Host: XXXXXXXXXXXXXX ^M User-Agent: Yealink SIP-T32G 32.70.1.33 00:15:65:XX:XX:XX^M Accept: */*^M Connection: Keep-Alive^M ^M
Oct 10 00:00:34 autop[386]: http.c(3542): ***send data*** ......
Oct 10 00:00:34 autop[386]: http.c(3650): recv header: HTTP/1.1 200 OK
Oct 10 00:00:34 autop[386]: http.c(2299): Content-Type: text/xml
Oct 10 00:00:34 autop[386]: http.c(2299): Last-Modified: Fri, 15 Sep 2017 05:15:36 GMT
Oct 10 00:00:34 autop[386]: http.c(2299): Accept-Ranges: bytes
Oct 10 00:00:34 autop[386]: http.c(2299): ETag: "31c6e2a9e12dd31:0"
Oct 10 00:00:34 autop[386]: http.c(2299): Server: Microsoft-IIS/7.5
Oct 10 00:00:34 autop[386]: http.c(2299): X-Powered-By: ASP.NET
Oct 10 00:00:34 autop[386]: http.c(2299): Date: Fri, 15 Sep 2017 05:18:12 GMT
Oct 10 00:00:34 autop[386]: http.c(2299): Content-Length: 81456
Oct 10 00:00:34 autop[386]: http.c(2299):
Oct 10 00:00:34 autop[386]: [./src/fileStream.cpp :1052] IFO Open URL OK
Oct 10 00:00:39 autop[386]: http.c(1327): http recv timeout:5
Oct 10 00:00:44 autop[386]: http.c(1327): http recv timeout:5
Just wanting to see if anyone has found a fix for not being able to encrypt the MAC based configuration file on an older T32G handset.
In the common file are you allowed to use the following:
auto_provision.aes_key_in_file = 1
auto_provision.update_file_mode = 1
Or does the the aes key have to be placed in the common file?
The phone has the latest firmware: 32.70.1.33
Following from the phones log:
Oct 10 00:00:24 autop[386]: http.c(1443): dns timeout:5
Oct 10 00:00:24 autop[386]: error.c(111): dns count:2,RetryTimes=2, Timeout=1
Oct 10 00:00:24 autop[386]: http.c(358): device mac:00:15:65:38:14:3d
Oct 10 00:00:24 autop[386]: http.c(3505): query header: GET /yealink/y000000000032.cfg HTTP/1.1^M Host: XXXXXXXXXXXXXX^M User-Agent: Yealink SIP-T32G 32.70.1.33 00:15:65:XX:XX:XX^M Accept: */*^M Connection: Keep-Alive^M ^M
Oct 10 00:00:24 autop[386]: http.c(3542): ***send data*** ......
Oct 10 00:00:24 autop[386]: http.c(3650): recv header: HTTP/1.1 200 OK
Oct 10 00:00:24 autop[386]: http.c(2299): Content-Type: text/xml
Oct 10 00:00:24 autop[386]: http.c(2299): Last-Modified: Fri, 15 Sep 2017 05:17:12 GMT
Oct 10 00:00:24 autop[386]: http.c(2299): Accept-Ranges: bytes
Oct 10 00:00:24 autop[386]: http.c(2299): ETag: "a6b3fe3e12dd31:0"
Oct 10 00:00:24 autop[386]: http.c(2299): Server: Microsoft-IIS/7.5
Oct 10 00:00:24 autop[386]: http.c(2299): X-Powered-By: ASP.NET
Oct 10 00:00:24 autop[386]: http.c(2299): Date: Fri, 15 Sep 2017 05:18:01 GMT
Oct 10 00:00:24 autop[386]: http.c(2299): Content-Length: 4868
Oct 10 00:00:24 autop[386]: http.c(2299):
Oct 10 00:00:24 autop[386]: [./src/fileStream.cpp :1052] IFO Open URL OK
Oct 10 00:00:29 autop[386]: http.c(1327): http recv timeout:5
Oct 10 00:00:34 autop[386]: http.c(1327): http recv timeout:5
Oct 10 00:00:34 autop[386]: [./src/autoParser.cpp :238 ] IFO Unencrypted file cannot be updated!
Oct 10 00:00:34 autop[386]: [./src/autoParser.cpp :911 ] ERR Decryption file error!
Oct 10 00:00:34 autop[386]: [./src/autoUpgrade.cpp :990 ] IFO strMacName = [XXXXXXXXXXXX.cfg]
Oct 10 00:00:34 autop[386]: [./src/autoParser.cpp :706 ] IFO Open download stream
Oct 10 00:00:34 autop[386]: [./src/fileStream.cpp :937 ] IFO OpenDownloadStream[XXX.XXX][/yealink/XXXXXXXXXXXX.cfg]
Oct 10 00:00:34 autop[386]: http.c(1443): dns timeout:5
Oct 10 00:00:34 autop[386]: error.c(111): dns count:2,RetryTimes=2, Timeout=1
Oct 10 00:00:34 autop[386]: http.c(358): device mac:00:15:65:XX:XX:XX
Oct 10 00:00:34 autop[386]: http.c(3505): query header: GET /yealink/001565XXXXXX.cfg HTTP/1.1^M Host: XXXXXXXXXXXXXX ^M User-Agent: Yealink SIP-T32G 32.70.1.33 00:15:65:XX:XX:XX^M Accept: */*^M Connection: Keep-Alive^M ^M
Oct 10 00:00:34 autop[386]: http.c(3542): ***send data*** ......
Oct 10 00:00:34 autop[386]: http.c(3650): recv header: HTTP/1.1 200 OK
Oct 10 00:00:34 autop[386]: http.c(2299): Content-Type: text/xml
Oct 10 00:00:34 autop[386]: http.c(2299): Last-Modified: Fri, 15 Sep 2017 05:15:36 GMT
Oct 10 00:00:34 autop[386]: http.c(2299): Accept-Ranges: bytes
Oct 10 00:00:34 autop[386]: http.c(2299): ETag: "31c6e2a9e12dd31:0"
Oct 10 00:00:34 autop[386]: http.c(2299): Server: Microsoft-IIS/7.5
Oct 10 00:00:34 autop[386]: http.c(2299): X-Powered-By: ASP.NET
Oct 10 00:00:34 autop[386]: http.c(2299): Date: Fri, 15 Sep 2017 05:18:12 GMT
Oct 10 00:00:34 autop[386]: http.c(2299): Content-Length: 81456
Oct 10 00:00:34 autop[386]: http.c(2299):
Oct 10 00:00:34 autop[386]: [./src/fileStream.cpp :1052] IFO Open URL OK
Oct 10 00:00:39 autop[386]: http.c(1327): http recv timeout:5
Oct 10 00:00:44 autop[386]: http.c(1327): http recv timeout:5
↧
↧
IPv6
Will the W52P ever support IPv6?
↧
Off-Hook Dialtone
Hi There
I am looking to enable the dialtone that one hears when picking up the handset, but when a call is terminated. So when the call is terminated, the active line goes dead as well, so one does not hear the dialtone even when the handset is off the hook. One needs to visually monitor the display of the phone to determine if a call is no longer active.
I want to know if it's possible for the phone to always play the dial tone when the handset is off the hook, even when an active call is terminated, so that the user will know when/if a call is terminated.
Kind Regards
Dalton
I am looking to enable the dialtone that one hears when picking up the handset, but when a call is terminated. So when the call is terminated, the active line goes dead as well, so one does not hear the dialtone even when the handset is off the hook. One needs to visually monitor the display of the phone to determine if a call is no longer active.
I want to know if it's possible for the phone to always play the dial tone when the handset is off the hook, even when an active call is terminated, so that the user will know when/if a call is terminated.
Kind Regards
Dalton
↧
T58V - T58A Email and Calendar native apps
Hello all,
I was able to configure an email account in the phone native email app, it only works as IMAP, I was hoping that it would sync the calendar app also, but it does not work.
How can I configure the calendar app in this phone?
Also, how can I delete the an email account from the email app, there is not a delete button, and I don't really want to keep my email in this demo phone
I was able to configure an email account in the phone native email app, it only works as IMAP, I was hoping that it would sync the calendar app also, but it does not work.
How can I configure the calendar app in this phone?
Also, how can I delete the an email account from the email app, there is not a delete button, and I don't really want to keep my email in this demo phone
↧
↧
Enable MWI ?
Hello,
I'm not getting the MWI led when a VM is left.
Not sure where to find that setting?
Thanks,
YM
I'm not getting the MWI led when a VM is left.
Not sure where to find that setting?
Thanks,
YM
↧
Paging Tone
Hello everybody!
Is there a possibility to disable the loud beep-tone on the phone, which initializes the paging-call? One of our customers uses the paging-function for "emergency-calls" and this loud tone after pressing the short-key for paging is disturbing...
He uses a 3CX v15 and T46G / T42G with FW 28.81.0.110 / 29.81.0.110.
Thank you for any answers!
BR Christian
Is there a possibility to disable the loud beep-tone on the phone, which initializes the paging-call? One of our customers uses the paging-function for "emergency-calls" and this loud tone after pressing the short-key for paging is disturbing...
He uses a 3CX v15 and T46G / T42G with FW 28.81.0.110 / 29.81.0.110.
Thank you for any answers!
BR Christian
↧
Automatic hand free on CTI call
Hi,
We use in the past aastra phones with CTI outgoing calls and automatocly the phone goes to hand free mode when calling
CTI calls work well instead we need to hang up or push hand free button to have the call.
What can I change in the phone (T46G T46S T56A...)
Many thanks
Patrick
We use in the past aastra phones with CTI outgoing calls and automatocly the phone goes to hand free mode when calling
CTI calls work well instead we need to hang up or push hand free button to have the call.
What can I change in the phone (T46G T46S T56A...)
Many thanks
Patrick
↧
T29 Contacts and Photos
Having a problem with 3cx v15.5 firmware 46.81.0.110 uploading directory and photos. Is 3cx v12.5 directory a format different than v15.5?
↧
↧
W52P disable call ended display
Hi
I have a 3CX system setup using W52Ps and T27Gs the way it is setup is 2 ring groups, if unanswered on the first ring group it fails over onto the second ring group. Some of the phones are in both rings groups. On the T27G this fails over seamlessly, unfortunately on the W52Ps it displays 'Call Ended' after the first ring group and then takes a second or so before the phone starts ringing again, is there anyway to disable the phone displaying call ended?
I have a 3CX system setup using W52Ps and T27Gs the way it is setup is 2 ring groups, if unanswered on the first ring group it fails over onto the second ring group. Some of the phones are in both rings groups. On the T27G this fails over seamlessly, unfortunately on the W52Ps it displays 'Call Ended' after the first ring group and then takes a second or so before the phone starts ringing again, is there anyway to disable the phone displaying call ended?
↧
Failed to change provisioning server - W52P
Good afternoon,
I am experiencing difficulties in provisioning the W52P device via TFTP, today I already use it normally. But I'm changing server, but even with reset of the machine the base keeps looking for the old server, even I manually configuring the new server.
I did a test with a model T29P device and it worked normally.
Any idea what to do?
Thank you.
I am experiencing difficulties in provisioning the W52P device via TFTP, today I already use it normally. But I'm changing server, but even with reset of the machine the base keeps looking for the old server, even I manually configuring the new server.
I did a test with a model T29P device and it worked normally.
Any idea what to do?
Thank you.
↧
See the sender of a transfer in phone display
Hi,
we are using 3CX with T46G Phones and want to see the sender of transfered calls in phone display. As an example for an blind transfer:
external number via internal number
Is that possible?
Regards,
Jacob
we are using 3CX with T46G Phones and want to see the sender of transfered calls in phone display. As an example for an blind transfer:
external number via internal number
Is that possible?
Regards,
Jacob
↧
Multicast to PC through PC port
We use a UDP multicast video stream on our PCs. When the PC is directly connected to our network the UDP multicast stream shows fine on the PC. When we connect the PC through the PC port on the phone, the UDP multicast video stream is all jumbled up on the PC and not watchable.
We have both a T21 E2 and T46 phones and tried on both. Neither one works.
Anyone have any ideas?
We have both a T21 E2 and T46 phones and tried on both. Neither one works.
Anyone have any ideas?
↧
↧
features.off_hook_answer.enable not working as expected
Hi there
I understand that the functionality this parameter provides is to not automatically answer an incoming line upon lifting the handset (and other methods) and a Line key needs to be pressed. This allows for selective lines to be answered rather than the first one ringing on the phone.
The functionality works as expected however if you lift the handset and then put it back down without selecting a line, you hang up the ringing line.
This behaviour is obviously not acceptable and I suspect is a bug.
I am running Firmware 28.81.0.110.
Thanks
Mike
I understand that the functionality this parameter provides is to not automatically answer an incoming line upon lifting the handset (and other methods) and a Line key needs to be pressed. This allows for selective lines to be answered rather than the first one ringing on the phone.
The functionality works as expected however if you lift the handset and then put it back down without selecting a line, you hang up the ringing line.
This behaviour is obviously not acceptable and I suspect is a bug.
I am running Firmware 28.81.0.110.
Thanks
Mike
↧
42S S4B firmware
Hi,
I bought a T42S with the S4B license for testing purposes and was wondering if there is an update to the firmware? The phone currently has 66.8.0.5
Thank you,
Courtney
Looking for the Common CFG download for this phone too. I only see the T42G model on the website.
I bought a T42S with the S4B license for testing purposes and was wondering if there is an update to the firmware? The phone currently has 66.8.0.5
Thank you,
Courtney
Looking for the Common CFG download for this phone too. I only see the T42G model on the website.
(Today 05:04 PM)Courtney Wrote: Hi,
I bought a T42S with the S4B license for testing purposes and was wondering if there is an update to the firmware? The phone currently has 66.8.0.5
Thank you,
Courtney
↧
Where to get Skype for Business firmware for T46S?
We purchased a Skype for Business edition T46S. It shipped with S4B firmware, but we updated it with the latest ROM firmware via the support website - which does not appear to include Skype for business support.
Where can we download the S4B Specific firmware for the T46s?
Where can we download the S4B Specific firmware for the T46s?
↧
T41P - Problems with OpenVPN connection
Hi there,
I try to use the Yealink T41P Phone through an VPN Tunnel.
But the Phone doesn't open the Tunnel, to verify that the VPN Settings and Profile is correct I renamed the Configuration to vpn.ovpn and imported it to my Windows PC with the OpenVPN GUI installed. There I can establish an VPN Tunnel to the remote Network.
Someone can HELP please?
Data of the Phone:
Firmware Version 36.82.0.20
Hardware Version 36.0.0.0.0.0.0
This is the Configuration:
In the Syslog I could see some "no route to host" errors.
I try to use the Yealink T41P Phone through an VPN Tunnel.
But the Phone doesn't open the Tunnel, to verify that the VPN Settings and Profile is correct I renamed the Configuration to vpn.ovpn and imported it to my Windows PC with the OpenVPN GUI installed. There I can establish an VPN Tunnel to the remote Network.
Someone can HELP please?
Data of the Phone:
Firmware Version 36.82.0.20
Hardware Version 36.0.0.0.0.0.0
This is the Configuration:
Code:
client
setenv SERVER_POLL_TIMEOUT 4
nobind
remote xxx.xxx.com 1194 udp
dev tun
dev-type tun
remote-cert-tls server
reneg-sec 604800
sndbuf 100000
rcvbuf 100000
auth-retry nointeract
comp-lzo no
verb 3
ca /config/openvpn/keys/ca.crt
cert /config/openvpn/keys/client.crt
key /config/openvpn/keys/client.keyIn the Syslog I could see some "no route to host" errors.
Code:
09-26-2017 09:59:52 Daemon.Error 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: read UDPv4 [EHOSTUNREACH]: No route to host (code=113)
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: UDPv4 link remote: xx.xx.xx.xx:1194
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: UDPv4 link local: [undef]
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: Expected Remote Options hash (VER=V4): '530fdded'
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: Local Options hash (VER=V4): '41690919'
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: Socket Buffers: R=[112640->200000] S=[112640->200000]
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: LZO compression initialized
09-26-2017 09:59:52 Daemon.Warning 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: SIGUSR1[soft,server_poll] received, process restarting
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: TCP/UDP: Closing socket
09-26-2017 09:59:52 Daemon.Notice 192.168.2.16 Sep 1 00:05:27 openvpn[1039]: Server poll timeout, restarting
09-26-2017 09:59:51 Local0.Info 192.168.2.16 Sep 1 00:05:26 sys [895]: SRV <6+info > Fail to sync NTP time(de.pool.ntp.org).
09-26-2017 09:59:51 Daemon.Error 192.168.2.16 Sep 1 00:05:26 openvpn[1039]: read UDPv4 [EHOSTUNREACH]: No route to host (code=113)
09-26-2017 09:59:49 Daemon.Error 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: read UDPv4 [EHOSTUNREACH]: No route to host (code=113)
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: UDPv4 link remote: xx.xx.xx:1194
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: UDPv4 link local: [undef]
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: Expected Remote Options hash (VER=V4): '530fdded'
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: Local Options hash (VER=V4): '41690919'
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: Socket Buffers: R=[112640->200000] S=[112640->200000]
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: LZO compression initialized
09-26-2017 09:59:49 Daemon.Warning 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: SIGUSR1[soft,server_poll] received, process restarting
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: TCP/UDP: Closing socket
09-26-2017 09:59:49 Daemon.Notice 192.168.2.16 Sep 1 00:05:23 openvpn[1039]: Server poll timeout, restarting
09-26-2017 09:59:47 Local0.Info 192.168.2.16 Sep 1 00:05:22 sys [895]: SRV <6+info > Fail to sync NTP time(de.pool.ntp.org).
09-26-2017 09:59:46 Daemon.Error 192.168.2.16 Sep 1 00:05:21 openvpn[1039]: read UDPv4 [EHOSTUNREACH]: No route to host (code=113)
09-26-2017 09:59:44 Daemon.Error 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: read UDPv4 [EHOSTUNREACH]: No route to host (code=113)
09-26-2017 09:59:44 Daemon.Notice 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: UDPv4 link remote: xx.xx.xx.xx:1194
09-26-2017 09:59:44 Daemon.Notice 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: UDPv4 link local: [undef]
09-26-2017 09:59:44 Daemon.Notice 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: Expected Remote Options hash (VER=V4): '530fdded'
09-26-2017 09:59:44 Daemon.Notice 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: Local Options hash (VER=V4): '41690919'
09-26-2017 09:59:44 Daemon.Notice 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
09-26-2017 09:59:44 Daemon.Notice 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: Socket Buffers: R=[112640->200000] S=[112640->200000]
09-26-2017 09:59:44 Daemon.Notice 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
09-26-2017 09:59:44 Daemon.Notice 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: LZO compression initialized
09-26-2017 09:59:44 Daemon.Warning 192.168.2.16 Sep 1 00:05:19 openvpn[1039]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables↧
↧
Dialing codes
i am trying to create a local directory that contain both UK and Ireland contacts. the directory works fine for UK numbers in that the name and number shows up on the phone display, however, Southern Ireland numbers (such as 00353xxxxxxxx) will only display the number but not the person calling.
Anyone come across this before and is there a work-a-round?
![Angry]( "Angry")
Anyone come across this before and is there a work-a-round?
↧
T23G and CP860 manual time issue
Hi,
1)I have a problem that i can't set manual time setting on T23G .
I set local_time.manual_time_enable = 1 in provisioining config file, but it still looks like "disabled" in WEB and phone Menu
I tried to set I set auto_provision.custom.protect = 1 and setup Manual time via WEB and phone Menu but it lose settings after reboot.
I had the same issue with T21E P and i knew that they don't have clock chip. Do T23G have clock chip and ability to set and keep manual time?
2) I set manual manual_time_enable = 1 on CP860 and keeps value "enable" but lose date and time after reboot
Do CP860 have clock chip and ability to set and keep manual time?
Thanks in advance,
Dmitry
1)I have a problem that i can't set manual time setting on T23G .
I set local_time.manual_time_enable = 1 in provisioining config file, but it still looks like "disabled" in WEB and phone Menu
I tried to set I set auto_provision.custom.protect = 1 and setup Manual time via WEB and phone Menu but it lose settings after reboot.
I had the same issue with T21E P and i knew that they don't have clock chip. Do T23G have clock chip and ability to set and keep manual time?
2) I set manual manual_time_enable = 1 on CP860 and keeps value "enable" but lose date and time after reboot
Do CP860 have clock chip and ability to set and keep manual time?
Thanks in advance,
Dmitry
↧
Replace rule not working for certain prefixes
I've set up hundreds of replace rules without issue, but for some reason prefix 110 and 112 do not work. The replace number is never dialed when I dial 110 and 112 with a replace rule in place.
In the screenshotted example below, when I dial 110, the phone dials 110 instead of 81110. Same issue for 112/81112. However, when I dial 111, 81111 is correctly dialed.
I'm running a T46G with the latest firmware (T46-28.82.0.20). I also experience this on a T21p running 34.72.0.76. I've tried setting up the rules via the web UI and RPS mac specifig cfg. Broken in all cases.
![[Image: replacerule.png]]()
In the screenshotted example below, when I dial 110, the phone dials 110 instead of 81110. Same issue for 112/81112. However, when I dial 111, 81111 is correctly dialed.
I'm running a T46G with the latest firmware (T46-28.82.0.20). I also experience this on a T21p running 34.72.0.76. I've tried setting up the rules via the web UI and RPS mac specifig cfg. Broken in all cases.
![[Image: replacerule.png]](http://soundcurve.com/replacerule.png)
↧