Hello,
First post here, already with problem
![Undecided]( "Undecided")
I got T23P SIP phone and I am trying to configure auto provisioning for it. My TFTP server is working fine and it is visible in the network for phone. I'm using DHCP server to propagate IP address of the TFTP server for provisioning. Aaaand it is working, but not all statements. My TFTP/provisioning server contain 3 files:
- y000000000044.cfg - common file cfg that contains:
Code:
#!version:1.0.0.1
#######################################################################################
## Security ##
#######################################################################################
static.security.user_password = admin:adminpass
static.security.user_name.user = useruser
static.security.user_password = useruser:userpass
#######################################################################################
## Autoprovision ## ##
#######################################################################################
static.auto_provision.power_on = 1
static.auto_provision.dhcp_option.enable = 1
static.auto_provision.server.url = tftp://10.1.0.1
#######################################################################################
## Language Settings ##
#######################################################################################
static.lang.wui = English
static.lang.gui = French
#######################################################################################
## Features DND ##
#######################################################################################
features.dnd.enable = 1
but Security, Autoprovision and Language Settings statements does not work, only DND comes turned on after phone reset to factory settings. So this config is visible for phone, but why this won't change those settings? I need to change default admin password and user password for Action URI server.
- 001565XXXXXX.boot - MAC-oriented boot file (XXXXXX is this T23P phone last digits of MAC addr) that contains almost nothing:
Code:
#!version:1.0.0.1
## The header above must appear as-is in the first line
overwrite_mode = 1
- 001565XXXXXX.cfg - MAC-oriented config file (XXXXXX is this T23P phone last digits of MAC addr) that contains SIP account data, SIP server information, URI server and Dial Plan.
Code:
#!version:1.0.0.1
account.1.enable = 1
account.1.label = MR X
account.1.display_name = MR X
account.1.user_name = username
account.1.auth_name = username
account.1.password = pass
account.1.sip_server.1.address = a.b.c.d
#######################################################################################
## Features Action URI ##
#######################################################################################
features.action_uri_limit_ip = e.f.g.h
#######################################################################################
## Dial Plan ##
#######################################################################################
dialplan.replace.prefix.1 = xx
dialplan.replace.replace.1 = xx
dialplan.replace.line_id.1 = 1
This one works just fine. My line is configured and SIP account is properly registering to the SIP server. URI and Dial Plan config statements works too.
Other thing: this configuration works for me only if I have firmware 44.80.0.130. With newer versions it does not work with this same DHCP server configuration and TFTP/provisioning server and config files. What might be wrong here? There should be no differences between configuration statements for 44.80 and 44.81 versions, right? Maybe I am doing something wrong? Thanks in advance for any help.
