Many a time, the message is usually appended at the bottom of all outgoing emails if you’re using Outlook or any other email client on your device and getting the email signature at the bottom and want to disable Avast Email Signature on Device. Feel free to get connected to technical experts and get your issue resolved on a time.
↧
How Do I turn off Avast email signature?
↧
Cannot stop T58 Red LED Flashing
Hi,
I have 16 x T58's deployed in a home.
We have been trying to stop the red status light from flashing, aside from inbound calls.
However, after a period of time, all the handsets will start to flash red slowly.
I have removed any missed calls indicators from the PBX (Vodia)
It seems to be with the T58 handsets. All are on FW 58.85.0.5
I have the following in the cfg:
phone_setting.common_power_led_enable = 0
phone_setting.talk_and_dial_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.ring_power_led_flash_enable = 1
phone_setting.mute_power_led_flash_enable= 0
phone_setting.hold_and_held_power_led_flash_enable = 0
phone_setting.missed_call_power_led_flash.enable = 0
Is there any way to see what is causing this red light ?
Help
Thanks
I have 16 x T58's deployed in a home.
We have been trying to stop the red status light from flashing, aside from inbound calls.
However, after a period of time, all the handsets will start to flash red slowly.
I have removed any missed calls indicators from the PBX (Vodia)
It seems to be with the T58 handsets. All are on FW 58.85.0.5
I have the following in the cfg:
phone_setting.common_power_led_enable = 0
phone_setting.talk_and_dial_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.ring_power_led_flash_enable = 1
phone_setting.mute_power_led_flash_enable= 0
phone_setting.hold_and_held_power_led_flash_enable = 0
phone_setting.missed_call_power_led_flash.enable = 0
Is there any way to see what is causing this red light ?
Help
Thanks
↧
↧
Suggestions for YDMP FAQ
This Post is open to collect customer's suggestions for FAQ of Yealink Device Management Platfrom.
If you are using Yealink Device Management Platfromand and have some suggestions about FAQ , come and shout at this Post or send email to paz@yealink.com.
1. Attached writted FAQ, please help to check and give your feedback. Does it easy to understand or it's complex?
2. If you have other topics about YDMP can generate FAQ, please enlight me. Thanks.
![.tar]()
FAQ.tar (Size: 2.73 MB / Downloads: 0)
If you are using Yealink Device Management Platfromand and have some suggestions about FAQ , come and shout at this Post or send email to paz@yealink.com.
1. Attached writted FAQ, please help to check and give your feedback. Does it easy to understand or it's complex?
2. If you have other topics about YDMP can generate FAQ, please enlight me. Thanks.
FAQ.tar (Size: 2.73 MB / Downloads: 0)
↧
10 Helpful Applications for Students
There are a huge number of utilizations accessible on the Google Play Store and App Store. Moreover, there are a few classes of uses, including introductions, note-taking, secret key keeping, timekeeping, money related tracker, and the board application that can give a few highlights on your gadget. In this blog, we will locate some generally useable and best applications for understudies that can help them from numerous points of view.
There are bunches of application available for the understudies to help in their examinations and day by day schedule the board. You can discover free applications just as paid applications on the Google Play Store or App Store. In this blog, we will list enlighten you regarding free and best applications for the understudy.
Here is the rundown of the best applications accessible on Google Play Store and App store for the understudy:-
1. Note Taking
2. Writing Paper
3. Screen Recorder
4. Study Groups
5. Programming
6. Health
7. Presentations
8. Time Management
9. Math
10. Career Tools
Regards: Office.com/Setup | McAfee.com/Activate
There are bunches of application available for the understudies to help in their examinations and day by day schedule the board. You can discover free applications just as paid applications on the Google Play Store or App Store. In this blog, we will list enlighten you regarding free and best applications for the understudy.
Here is the rundown of the best applications accessible on Google Play Store and App store for the understudy:-
1. Note Taking
2. Writing Paper
3. Screen Recorder
4. Study Groups
5. Programming
6. Health
7. Presentations
8. Time Management
9. Math
10. Career Tools
Regards: Office.com/Setup | McAfee.com/Activate
↧
W60P remote control
Can the W60p system be remote controlled to make phone calls?
The help item here: http://support.yealink.com/faq/faqInfo?id=562 lists the W60P in the applicable product types at the bottom, but the Web UI does not seem to have the Remote Control page on the Features tab.
The help item here: http://support.yealink.com/faq/faqInfo?id=562 lists the W60P in the applicable product types at the bottom, but the Web UI does not seem to have the Remote Control page on the Features tab.
↧
↧
Students Assignment Writing Help
Students can get professional assignment help from best essay writing service online academic platform. this academic platform is the no.1 assignment help services for students.
↧
W60P remote control
Can the W60p system be remote controlled to make phone calls?
The help item here: http://support.yealink.com/faq/faqInfo?id=562 lists the W60P in the applicable product types at the bottom, but the Web UI does not seem to have the Remote Control page on the Features tab.
The help item here: http://support.yealink.com/faq/faqInfo?id=562 lists the W60P in the applicable product types at the bottom, but the Web UI does not seem to have the Remote Control page on the Features tab.
↧
T46s won't try to register to server on local subnet
I have a Yealink T46s running v85.05 firmware with static IP 172.16.0.11 and DNS 8.8.8.8. The phone server 172.16.0.5 is in the same subnet 172.16.0.0/23 (literally on the same switch). I won't detail what type of phone server because its not even receiving packets from the Yealink phone, so the issue is on phone side.
Using the webpage of the phone / Settings / Configuration / Pcap, start
and configure phone like:
(Register Name, Username and Password are set as appropriate)
account.1.sip_server.1.address=172.16.0.5
account.1.sip_server.1.port=5060
account.1.sip_server.1.transport_type=1 (tcp)
account.1.sip_server.2.address=sip2.example.com
account.1.sip_server.2.port=5060
account.1.sip_server.2.transport_type=1 (tcp)
The registration to sip2.example.com works, but 172.16.0.5 fails.
I stop the pcap and see that the phone does have register traffic to sip2.example.com, but no packets, NONE AT ALL, are sent to 172.16.0.5.
When I export the log with Settings / Configuration / Export Local Log
(which by the way exports a zip file that's really a tar, confusing window's built in unzip program)
Anyways, the log shows the following messages over and over again:
<131>Sep 8 11:50:22 WEB [911:921]: WEB <3+error > 622.372.946:Send msg : [DONOW:NULL] [app_vpPhone], 0x60d02, 0, 0, , 5000
<131>Sep 8 11:50:22 WEB [911:921]: WEB <3+error > 622.373.614:CallDskMsgTimeoutEx [0x60d02] lret[2]
<131>Sep 8 11:51:05 sua [579.650]: NET <3+error > [255] close err socket=19!
<131>Sep 8 11:51:05 sua [579.650]: DLG <3+error > [255] out_socket is 0
<131>Sep 8 11:51:05 sua [579.650]: DLG <3+error > [000] <AEM> code=0x04030000, cb_transport_error (id=58), target=172.16.0.5:5060
I checked to make sure the phone can reach the phone server... Network / Diagnostics / Ping 172.16.0.5
# ping 172.16.0.5
PING 172.16.0.5 (172.16.0.5): 56 data bytes
64 bytes from 172.16.0.5: seq=0 ttl=64 time=0.484 ms
64 bytes from 172.16.0.5: seq=1 ttl=64 time=0.323 ms
64 bytes from 172.16.0.5: seq=2 ttl=64 time=0.336 ms
64 bytes from 172.16.0.5: seq=3 ttl=64 time=0.333 ms
--- 172.16.0.5 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.323/0.369/0.484 ms
I also double-checked that certificate checking was disabled at
Security / Trusted Certificates /
- Only Accept Trusted Certificates: Disabled
- Common Name Validation: Disabled
- CA Certificates: All Certificates
I even tried only having account.1.sip_server.1.address as sip1b.example.com (pointing to 172.16.0.5) and the phone still refused to sending a single packet.
If I switch the transport_mode to 0 (udp) it DOES send packets, but I don't want my phone server to allow UDP packets. Eventually I want to set up TLS/SRTP, so don't want to depent on UDP.
I really need to register to both servers. The first one is intentionally kept within the subnet to be resilient against DNS failure. The second server is in the cloud to allow remote users to reach a server if the primary goes down.
Any suggestions? or anyone know if this is a firmware bug?
Using the webpage of the phone / Settings / Configuration / Pcap, start
and configure phone like:
(Register Name, Username and Password are set as appropriate)
account.1.sip_server.1.address=172.16.0.5
account.1.sip_server.1.port=5060
account.1.sip_server.1.transport_type=1 (tcp)
account.1.sip_server.2.address=sip2.example.com
account.1.sip_server.2.port=5060
account.1.sip_server.2.transport_type=1 (tcp)
The registration to sip2.example.com works, but 172.16.0.5 fails.
I stop the pcap and see that the phone does have register traffic to sip2.example.com, but no packets, NONE AT ALL, are sent to 172.16.0.5.
When I export the log with Settings / Configuration / Export Local Log
(which by the way exports a zip file that's really a tar, confusing window's built in unzip program)
Anyways, the log shows the following messages over and over again:
<131>Sep 8 11:50:22 WEB [911:921]: WEB <3+error > 622.372.946:Send msg : [DONOW:NULL] [app_vpPhone], 0x60d02, 0, 0, , 5000
<131>Sep 8 11:50:22 WEB [911:921]: WEB <3+error > 622.373.614:CallDskMsgTimeoutEx [0x60d02] lret[2]
<131>Sep 8 11:51:05 sua [579.650]: NET <3+error > [255] close err socket=19!
<131>Sep 8 11:51:05 sua [579.650]: DLG <3+error > [255] out_socket is 0
<131>Sep 8 11:51:05 sua [579.650]: DLG <3+error > [000] <AEM> code=0x04030000, cb_transport_error (id=58), target=172.16.0.5:5060
I checked to make sure the phone can reach the phone server... Network / Diagnostics / Ping 172.16.0.5
# ping 172.16.0.5
PING 172.16.0.5 (172.16.0.5): 56 data bytes
64 bytes from 172.16.0.5: seq=0 ttl=64 time=0.484 ms
64 bytes from 172.16.0.5: seq=1 ttl=64 time=0.323 ms
64 bytes from 172.16.0.5: seq=2 ttl=64 time=0.336 ms
64 bytes from 172.16.0.5: seq=3 ttl=64 time=0.333 ms
--- 172.16.0.5 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.323/0.369/0.484 ms
I also double-checked that certificate checking was disabled at
Security / Trusted Certificates /
- Only Accept Trusted Certificates: Disabled
- Common Name Validation: Disabled
- CA Certificates: All Certificates
I even tried only having account.1.sip_server.1.address as sip1b.example.com (pointing to 172.16.0.5) and the phone still refused to sending a single packet.
If I switch the transport_mode to 0 (udp) it DOES send packets, but I don't want my phone server to allow UDP packets. Eventually I want to set up TLS/SRTP, so don't want to depent on UDP.
I really need to register to both servers. The first one is intentionally kept within the subnet to be resilient against DNS failure. The second server is in the cloud to allow remote users to reach a server if the primary goes down.
Any suggestions? or anyone know if this is a firmware bug?
↧
Increase BLF Label Field T42G
Is it possible to expand the field size for the BLF labels on the T42G.
I have found references on how to change it based on the T46+ but not the t42G.
As is the labels are more or less unusable.
Thanks
redmondsau
I have found references on how to change it based on the T46+ but not the t42G.
As is the labels are more or less unusable.
Thanks
redmondsau
↧
↧
Backlight lights up based on SIP session expire
I have this problem with both a T48G and a T48S each running respective most recent firmware. I've re-tried on every earlier firmware version still downloadable, with no resolution. I've factory reset and reconfigured, etc. with no resolution.
The issue is that the dimmed (or power-saved off) backlight will return to ON status whenever the SIP server registration expires (account.X.sip_server.1.expires) . For example, if that is set to 300s, then the backlight returns to ON every five minutes. This is quite annoying over time.
MAJOR additional information: with just one SIP account registered, this problem does NOT occur. However, my normal setup has two distinct SIP accounts. The enabling of the second account also activates this problem.
In researching the issue, I noticed that a similar problem was reported in the "T2xP Series" forum as thread "T22P display backlight lights up every 2 mins". That was around 2014 and that issue was eventually fixed with a firmware update. For the T22P issue, the number of SIP accounts registered wasn't specified. Perhaps the T22P user had only one account registered. I only mention this T22P problem because of the similar symptoms to what I'm seeing today with my T48G and T48S.
Any others seeing this issue? Any different configuration I need to set to allow two SIP accounts to run the backlight properly? Firmware Fix possible? (T48G is end-of-life, so access to an OLD firmware without this problem would also be acceptable.)
Thanks in advance for any help.
The issue is that the dimmed (or power-saved off) backlight will return to ON status whenever the SIP server registration expires (account.X.sip_server.1.expires) . For example, if that is set to 300s, then the backlight returns to ON every five minutes. This is quite annoying over time.
MAJOR additional information: with just one SIP account registered, this problem does NOT occur. However, my normal setup has two distinct SIP accounts. The enabling of the second account also activates this problem.
In researching the issue, I noticed that a similar problem was reported in the "T2xP Series" forum as thread "T22P display backlight lights up every 2 mins". That was around 2014 and that issue was eventually fixed with a firmware update. For the T22P issue, the number of SIP accounts registered wasn't specified. Perhaps the T22P user had only one account registered. I only mention this T22P problem because of the similar symptoms to what I'm seeing today with my T48G and T48S.
Any others seeing this issue? Any different configuration I need to set to allow two SIP accounts to run the backlight properly? Firmware Fix possible? (T48G is end-of-life, so access to an OLD firmware without this problem would also be acceptable.)
Thanks in advance for any help.
↧
Do you know about software configuration
I would like to know that, is there any way to configure this video conferencing platform in website, is there any API or apk file available that i could configure in to my website or mobile. i like this cloud based video conferencing plate-form.
↧
Data Initializing
I have a Yealink w60b and a w56h. the handset is stuck in "Data Initializing" mode. I can't get the handset to finish syncing up. Never seen them act like this before.
I have install close to 50 of these on Hosted IP service, and this is the first one that wont come up. Tried defaulting the handset and several power cycles of both the base and handset.
I have install close to 50 of these on Hosted IP service, and this is the first one that wont come up. Tried defaulting the handset and several power cycles of both the base and handset.
↧
Yealink C920 password issue
Hi,
I have been given a CP920 conference phone by a friend who no longer needs it. I am trying to do a factory reset so that I can use it. The issue is when I go into the Advanced menu it asks for a password and the default "admin" does not work. When I asked my friend, he said they never set a password.
Is there a way to do a factory reset without knowing the password? Or is the phone bricked and useless?
Many thanks for any help that you can give.
Dave
I have been given a CP920 conference phone by a friend who no longer needs it. I am trying to do a factory reset so that I can use it. The issue is when I go into the Advanced menu it asks for a password and the default "admin" does not work. When I asked my friend, he said they never set a password.
Is there a way to do a factory reset without knowing the password? Or is the phone bricked and useless?
Many thanks for any help that you can give.
Dave
↧
↧
T28P foward call doesn´t work with 2.73.0.50
Hi, we have several Yealink T series phones in our company.
We recently update some firmware and foward call doesn´t work.
We update from 2.61.0.80 to 2.73.0.50
We have to downgrade to 2.72.0.30 to make foward call work.
Firmware Version: 2.72.0.30
Hardware Version: 1.0.0.39
I need to do seomething to get foward call work on new firmware version?
Regards,
We recently update some firmware and foward call doesn´t work.
We update from 2.61.0.80 to 2.73.0.50
We have to downgrade to 2.72.0.30 to make foward call work.
Firmware Version: 2.72.0.30
Hardware Version: 1.0.0.39
I need to do seomething to get foward call work on new firmware version?
Regards,
↧
T28p - Firmware version advice
Hi, for Yealink T2x phone there are new firmware , 2.73.0.50 and 2.73.193.50.
What differences they have?
They are for some specific model?
I try to look at release notes, but nothing found.
Regards.
What differences they have?
They are for some specific model?
I try to look at release notes, but nothing found.
Regards.
↧
Short Description of Tadalista and Cenforce Tablet
↧
One CFG file for one phone
i'm stuck with this kind of problem: i have to generate two files (mac.boot & mac.cfg) for every my phone.
Description:
There are a number on Yealink phones (and GS too) which configured by autoprovisioning process from tftp server. i have such structure in the tftp server:
/ (root)
- y000000000000.boot (for brand new phones, it loads the network.cfg for VLAN settings)
|
--- yealink (dir for Yealink configs)
|
+-- network.cfg (sets network.vlan.*, local_time.*, auto_provision.*)
+-- sip_acc1.cfg (turn on account1 and sets sip_server.1.address)
+-- features.cfg (sets intercom, language, user_password for wui)
+-- ldap.cfg (sets ldap config)
+-- T23G.cfg
+-- T27G.cfg
+-- T40P.cfg
+-- <MAC>.boot (includes all (network,sip,features,ldap) CFGs, one of T*.cfg files, and <MAC>.cfg
+-- <MAC>.cfg (sets dhcp_host_name, and auth info for the account.1)
This structure gives me a flexibility in the configuration of yealink phone pool, but I have to generate both <MAC>.boot and <MAC>.cfg files for every phone.
I tried to move parameters form the <MAC>.cfg file to a bottom of the <MAC>.boot, it's doesn't work. I tried to use the y000000000000.boot but i've got the same result. I think common parameters do not work in *.boot files.
In other side, I tried to make <MAC>.cfg file with a sequence of a loading needed *.cfg files, but AFAIK include:config doesn't work in *.cfg.
Is there a way to separate common configuration parameters and a particular authentication information in defferent files?
Sorry for my English. I hope I described the problem clearly.
Description:
There are a number on Yealink phones (and GS too) which configured by autoprovisioning process from tftp server. i have such structure in the tftp server:
/ (root)
- y000000000000.boot (for brand new phones, it loads the network.cfg for VLAN settings)
|
--- yealink (dir for Yealink configs)
|
+-- network.cfg (sets network.vlan.*, local_time.*, auto_provision.*)
+-- sip_acc1.cfg (turn on account1 and sets sip_server.1.address)
+-- features.cfg (sets intercom, language, user_password for wui)
+-- ldap.cfg (sets ldap config)
+-- T23G.cfg
+-- T27G.cfg
+-- T40P.cfg
+-- <MAC>.boot (includes all (network,sip,features,ldap) CFGs, one of T*.cfg files, and <MAC>.cfg
+-- <MAC>.cfg (sets dhcp_host_name, and auth info for the account.1)
This structure gives me a flexibility in the configuration of yealink phone pool, but I have to generate both <MAC>.boot and <MAC>.cfg files for every phone.
I tried to move parameters form the <MAC>.cfg file to a bottom of the <MAC>.boot, it's doesn't work. I tried to use the y000000000000.boot but i've got the same result. I think common parameters do not work in *.boot files.
In other side, I tried to make <MAC>.cfg file with a sequence of a loading needed *.cfg files, but AFAIK include:config doesn't work in *.cfg.
Is there a way to separate common configuration parameters and a particular authentication information in defferent files?
Sorry for my English. I hope I described the problem clearly.
↧
↧
Yealink T41s Multiple sip Accounts
I programed my sip account into two different slots. When I disabled slot one I thought slot two would take inbound calls, but it doesn't. Only slot 1 takes inbound calls, slot 2 only makes outbound, but they are the same sip account. Do I need to change the port on slot 2? how do a fix
↧
CP960 Android and Teams
Hi Guys
2 questions on this.
We have a CP960 Android unit
1. Can we install Teams on it
2. Can we connect to 2 different VLANS on LAN and Wifi
Tx
Naz
2 questions on this.
We have a CP960 Android unit
1. Can we install Teams on it
2. Can we connect to 2 different VLANS on LAN and Wifi
Tx
Naz
↧
Phone features not working
I can set DND on my phone, but when I call it, it rings normally. Also, call foward is not working and doing the same thing. Any suggestions of what to check?
↧